This Lace Angel Ornament Crochet Pattern recreates the delicate look of a blush-pink angel with a round head, two open loop wings, and a little fan-stitch dress. Three rounded scallops form the hem, while a small chain loop makes it ready to hang.
Use a single shade of cotton for the quiet, handmade appearance of the reference. The angel lies flat, needs no stuffing, and makes a lovely tree ornament, gift topper, or small garland decoration.

Lace Angel Ornament Crochet Pattern: Project Details
- Skill level: confident beginner familiar with chains, double crochet, and turning rows.
- Terms: US crochet terminology.
- Estimated size: approximately 10–13 cm tall including the hanging loop, depending on yarn, hook, and blocking.
- Construction: one round head, a three-row dress worked from a separate small foundation loop, and two chain-loop wings. Sew the dress and head together at the neck.
- Appearance: dusty pink throughout, no face, no stuffing, and three broad lower scallops.
This is an original image-inspired adaptation, not a transcription of an existing designer’s instructions. Stitch counts have been checked, but this version has not been physically crocheted or independently tested. Use the written pattern for construction; the photos illustrate the intended appearance.
Materials
- Approximately 8–12 g of smooth sport-weight cotton in dusty blush pink.
- A 2.5–3 mm crochet hook, or a size that produces neat stitches without making the chains rigid.
- Tapestry needle and small scissors.
- Blocking mat, rustproof pins, and water for shaping.
- Optional washable fabric stiffener, used according to its label, if you prefer a firmer ornament.
A smooth, lightly twisted yarn keeps the fan stitches and open spaces visible. Fuzzy yarn hides the lace detail, while an oversized hook can make the long wings floppy. Before starting, crochet a few chains and double crochets to check that you can see the individual loops clearly.
Abbreviations and Counting Notes
- ch: chain.
- sl st: slip stitch.
- sc: single crochet.
- dc: double crochet.
- MR: magic ring.
- st / sts: stitch / stitches.
- ch-sp: chain space.
- Shell: 7 dc worked in the same chain space.
The initial ch 3 counts as one dc in the head and at the beginning of dress Rows 1 and 2. A turning ch 1 at the start of Row 3 does not count. All other chains form spaces or loops and are counted separately from the dc totals. Brackets at the end of an instruction describe the completed row or round.
1. Make the Round Head
Make an MR. Ch 3, then work 11 dc into the ring. Pull the ring closed and join with a sl st to the top of the beginning ch 3. [12 dc including the beginning chain]
Ch 10 for the small hanging loop, then sl st into the same stitch where the head round was joined. Fasten off, leaving a tail long enough to weave securely through the back of several stitches. Keep the loop at the top of the head. The dress will attach to the opposite, lower edge.
Flatten the circle gently with your fingers. The center should close neatly without puckering the outer stitches. If the tail slips while tightening the MR, hold the base of the stitches as you draw it closed, then weave the tail in two directions on the back.
2. Crochet the Fan-Stitch Dress
Make the dress separately. Ch 4 and join with a sl st to the first chain to make a small foundation ring. This loop sits at the neck beneath the head; do not work the dress into the head stitches.
- Row 1: Ch 3, work 4 dc into the foundation ring. Turn. [5 dc]
- Row 2: Ch 3 and dc in the first st; ch 3, skip 1 st, work (dc, ch 3, dc) in the center st; ch 3, skip 1 st, work 2 dc in the top of the beginning ch 3 from Row 1. Turn. [6 dc and three ch-3 spaces]
- Row 3: Ch 1, sc in the first st, skip the next dc; work 7 dc in the first ch-3 space, sc in the next dc; work 7 dc in the next ch-3 space, sc in the next dc; work 7 dc in the final ch-3 space; skip the next dc and sc in the top of the beginning ch 3 from Row 2. [three 7-dc shells and 4 sc]
Fasten off with a sewing tail. The three shells form the left, center, and right scallops. Each of the three ch-3 spaces receives one shell. Once blocked, the three fans spread across the lower edge.
Before fastening off, check that each shell contains exactly seven dc. Identify all four sc anchors: the first edge, the join after the first shell, the join after the center shell, and the final edge. Keep these anchors snug enough to separate the curves while allowing the fans to open.
3. Join the Head and Dress
Lay the head with its hanging loop pointing upward. Place the small foundation ring of the dress directly beneath the lower edge of the head. With the dress tail, sew that ring to two adjacent stitch tops at the bottom of the head. Take several small passes through both pieces, keeping all knots and yarn ends on the back.
The join should be narrow, like a little neck. Do not overlap the head over the first full fan row: leave the five dc of dress Row 1 visible below the join. Check the front before weaving in the remaining tail.
4. Add Two Open Chain-Loop Wings
Join yarn with a sl st at the left side of the neck seam. Ch 18 and sl st back into the same neck point to form the left wing. Fasten off. Repeat at the right side of the neck seam to make the second wing. [two ch-18 loops]
Keep the two chain loops equal in length and tension. Shape each loop into a long oval that spreads outward beside the head and upper dress. The wings are open chains, with no filling stitches inside. Use the tails to reinforce the neck join, then weave them through several stitches on the back.
If the wings twist, let the work relax before blocking and untwist each chain before pinning. Avoid pulling one side longer to compensate for uneven chains; remake the uneven loop so both wings have the same number of chains.
5. Block and Shape the Angel
Lightly dampen the angel and place it face up on a blocking mat. Pin the head into a round shape, set the hanging loop upright, and spread the wings evenly to the sides. Open the dress spaces and arrange the three shells into a balanced scalloped hem.
Allow the cotton to dry completely before removing the pins. For a firmer finish, use a suitable fabric stiffener according to the manufacturer’s directions, testing it on a scrap of the same yarn first. Preserve the open spaces rather than saturating them with excess product.
How to Read the Two Tabletop Charts
Two of the three instructional images show a complete stitch-symbol chart on a paper sheet above the finished angel lying on a table. Both charts describe the same pattern in different tabletop settings.
The head is a separate round of 12 dc, including the beginning ch 3. Its ch-10 hanger sits above it. Each long oval wing contains 18 chain symbols. The dress starts at its own ch-4 ring, opens through Rows 1 and 2, and ends in three 7-dc shells. Dashed marks at the neck indicate sewing, not crochet stitches. Follow the small row numbers and the English symbol key, and check the written instructions when changing direction.
Helpful Finishing Tips
- Head curls: check that there are 12 dc in the MR and that the stitches have not been pulled too tight.
- Wrong shell count: revisit Row 3. Work one shell into each of the three ch-3 spaces, leaving three shells.
- Wings droop: block them as long ovals and let them dry fully before hanging.
- Dress tilts: center the foundation ring under the head before sewing and pin both sides of the neck join.
- Loops snag: store the ornament flat in tissue paper with its wings arranged beside the dress.
To make a garland, crochet several angels in the same yarn and attach their top loops to a separate cord. Keep the cord’s weight off the wing loops so the shapes stay even. For a gift topper, tie a separate ribbon through the top hanging loop.
More Free Christmas Crochet Patterns
- Blue Scarf Snowman Wall Hanging
- Six-Point Star Ornament
- Christmas Bell Ornament
Save Your Lace Angel Ornament Crochet Pattern
Save this little pink angel for your handmade Christmas decorations. Happy crocheting from !
Photo Tutorial, Two Tabletop Charts, and Pinterest Images
Find all six 1000 × 1500 images below: one photo tutorial, two matching chart-and-piece tabletop views, and three Pinterest images.









