Flat Snowman Applique Crochet Pattern – Free Red Hat Guide

This Flat Snowman Applique Crochet Pattern combines two white circles with a jaunty red top hat, a carrot nose, and three red buttons. The simple black eyes and embroidered smile give the snowman the cheerful expression shown in the reference.

The pieces stay flat and unstuffed. Sew the finished snowman to a gift bag, a seasonal banner, or another fabric decoration, or keep it as a small decorative motif.

Flat Snowman Applique Crochet Pattern — flat white snowman with red top hat orange nose and three red buttons

Flat Snowman Applique Crochet Pattern: Project Details

  • Level: confident beginner, including increases and simple sewing.
  • Terms: US crochet terminology.
  • Estimated height: 16–20 cm including the hat; yarn and tension affect the size.
  • Construction: two white circles, a flat red hat crown and brim, two black eyes, an orange nose, and three red buttons.
  • Finish: flat, with no stuffing.

This is an original image-inspired adaptation. Stitch totals have been reviewed, but the pattern has not been physically crocheted or independently tested. Follow the written rounds for exact counts. The gallery illustrations show the intended shape and component placement.

Materials

  • Sport or light DK cotton: approximately 20 g white, 6 g red, and scraps of black and orange.
  • A 2.5–3 mm hook, or a size that makes tidy, even stitches.
  • Tapestry needle, scissors, pins, and a stitch marker.
  • Black embroidery yarn for the smile.

Use the same yarn weight for the circles and hat so the pieces stay in proportion. All the round eyes and buttons in this version are crocheted and sewn on. For a motif that children may handle, embroider those small details instead of attaching separate pieces.

Abbreviations and Counting Notes

  • MR: magic ring.
  • ch: chain.
  • sc: single crochet.
  • inc: 2 sc in the same stitch.
  • dec: single crochet 2 stitches together.
  • sl st: slip stitch.
  • st / sts: stitch / stitches.
  • R: round. Numbers in parentheses give the total.

Work the white circles in continuous rounds without turning. Mark the first stitch of each round and move the marker up. Each increase round adds six stitches. The final slip stitch used to finish a piece does not count as an extra stitch.

The hat and nose are worked in turned rows. Their ch 1 turning chains do not count as stitches. The colored facial details are sewn on after the white circles are finished; they are not additional stitches in the circle rounds.

1. Crochet the Larger Body Circle

Use white yarn and start at the center.

  1. R1: 6 sc in MR. (6)
  2. R2: inc in every st. (12)
  3. R3: (sc, inc) × 6. (18)
  4. R4: (sc in next 2 sts, inc) × 6. (24)
  5. R5: (sc in next 3 sts, inc) × 6. (30)
  6. R6: (sc in next 4 sts, inc) × 6. (36)
  7. R7: (sc in next 5 sts, inc) × 6. (42)
  8. R8: (sc in next 6 sts, inc) × 6. (48)

Sl st into the next stitch, fasten off, and weave in the ends. Pull the center closed firmly. Lay the circle on a flat surface and smooth it gently with your fingers.

If the circle ripples, count the stitches and check for accidental extra increases. If it cups despite correct counts, try a slightly larger hook or a more relaxed tension. Do not stuff or close the piece; it is a single flat disk.

2. Crochet the Smaller Head Circle

With white yarn, repeat Body R1–R6 only. The head finishes with 36 sc. Join with a sl st and leave a long sewing tail.

The head should be noticeably smaller than the body. Place both circles side by side and check their proportions before sewing. With the same yarn and hook, six head rounds and eight body rounds give a consistent size difference.

3. Join the Head and Body

Place the body flat with the right side facing up. Position the head above it, overlapping the lower head edge over the upper body edge by approximately one white round.

Pin the overlap and look at the silhouette. The circles should create a narrow neck without hiding too much of either circle. Sew across the overlap with white yarn, catching both layers with small stitches.

Work a second short line of stitches through the back of the join if needed to prevent the head from flopping. Keep the seam relaxed enough that the motif remains flat. Hide the tail on the wrong side.

4. Make Two Black Crochet Eyes

For each eye, work 6 sc in MR with black yarn. Join to the first sc with a sl st, pull the ring closed, and fasten off with a sewing tail. Each eye has 6 sc.

Pin the eyes on the upper half of the head, approximately four to six white stitches apart. Check the spacing with the orange nose temporarily between them. Sew each eye around its edge with small stitches, catching only the head fabric.

Keep the eyes circular and low against the surface. Avoid pulling the sewing tail so tightly that the eye becomes a raised knot. You may embroider filled black circles in the same positions instead.

5. Crochet the Orange Carrot Nose

With orange yarn, ch 4.

  • Row 1: sc in the second chain and each remaining chain. (3)
  • Row 2: ch 1, turn, dec, sc in next st. (2)
  • Row 3: ch 1, turn, dec. (1)

Fasten off with a sewing tail. Position the small triangle between and below the eyes, with its pointed end angled slightly downward. Sew the edges to the head, keeping the shape flat.

The nose does not need stuffing. If the point curls, dampen it lightly and flatten it before attaching.

6. Embroider the Smile

Use black yarn and a blunt needle to mark a gentle U-shaped smile below the nose. Begin at one corner, work several short backstitches around the curve, and finish at the opposite corner.

Do not use one long tight strand across the face, because it can pull the white circle inward. Let the stitches rest on the surface and check the expression before securing the ends on the back.

7. Crochet Three Red Buttons

With red yarn, work 6 sc in MR. Join with a sl st, close the ring, and leave a sewing tail. Make three identical circles.

Arrange the buttons in a vertical line down the body center. The upper button sits just below the neck, and the lower button stays inside the bottom edge. Pin all three before sewing so the spaces look even.

Sew each button separately around its perimeter. Keep them round and flat. Embroidered red circles can replace the small crochet pieces if preferred.

8. Crochet the Red Hat Crown

The crown is a flat rectangle worked from its upper edge down toward the brim. With red yarn, ch 13.

  • Row 1: sc in the second chain and each remaining chain. (12)
  • Rows 2–6, red: ch 1, turn, sc in all 12 sts. (12 each row)
  • Row 7, white: ch 1, turn, sc in all 12 sts. (12)
  • Row 8, red: ch 1, turn, sc in all 12 sts. (12)

Fasten off with a long sewing tail. The white seventh row forms the narrow hatband close to the bottom of the crown. Weave in the color-change tails on the back.

9. Crochet the Wide Red Brim

With red yarn, ch 19.

  • Row 1: sc in the second chain and each remaining chain. (18)
  • Row 2: ch 1, turn, sc in all 18 sts. (18)

Fasten off with a sewing tail. Center the brim along the lower red edge of the crown so it extends by approximately three stitches at each side. Sew the crown to the center section of the brim.

The brim may curve gently when positioned. Keep its outer ends free rather than sewing them tightly against the head; this gives the hat its slightly jaunty outline.

10. Attach the Hat

Place the completed red hat across the top of the snowman’s head, angled slightly to one side as in the reference. Keep both eyes fully visible below the brim.

Pin the hat and check the complete silhouette before sewing. Stitch the overlapping lower crown and central brim area to the head with matching yarn. Leave the upper crown free where it extends above the head.

There is no stuffing inside the hat, and it is not a wearable three-dimensional top hat. The flat crown and wide brim create the shape on the appliqué.

Finishing and Using the Motif

Secure every yarn tail on the wrong side, changing direction through several stitches before trimming. Smooth the circles and hat. If needed, dampen the crochet and dry it flat with the pieces gently pinned into place.

To attach the snowman to a fabric project, stitch around the white outer edges and the hat overlap with small sewing stitches. Test placement before sewing permanently. Choose a backing that supports the motif without stretching.

For a hanging decoration, add a separate reinforced loop behind the hat after finishing. The basic pattern remains the flat motif shown here and does not require a loop.

Reading the Two Tabletop Guides

The two images below show one complete snowman construction guide above the finished piece resting on a table. The white circles use single crochet symbols, and the colored pieces are marked as separately sewn details.

The exact counts are in the written pattern: the body has eight rounds ending in 48 sc; the head has six rounds ending in 36 sc. Make two black eyes and three red buttons, each with 6 sc. The hat crown and brim are worked separately in rows. Dashed lines indicate assembly rather than extra crochet stitches.

More Christmas Crochet Projects

Try the Blue Angel Ornament, the Santa Gift Basket, or the Red Snowflake Bauble for more handmade seasonal projects.

Photo Tutorial, Tabletop Guides and Pinterest Images

All six images are grouped below the complete instructions: one assembly tutorial, two tabletop construction guides, and three snowman project images to save for later.

Leave a Comment