Blue Angel Ornament Crochet Pattern – Free Circle Tutorial

This Blue Angel Ornament Crochet Pattern transforms a flat turquoise circle into a little flared dress. White triangular wings, a smiling wooden bead head, four pearl buttons, and a blue hanging loop recreate the delicate look of the reference.

The dress is folded rather than stuffed. Its two curved side flaps meet at the front, leaving the lower center open enough to reveal the circular crochet texture beneath.

Blue Angel Ornament Crochet Pattern — turquoise folded-circle angel with white wings wooden bead head and four pearls

Blue Angel Ornament Crochet Pattern: Project Details

  • Level: confident beginner, with folding and sewing.
  • Terms: US crochet terminology.
  • Estimated height: 11–14 cm without the hanging loop; yarn and bead size affect the result.
  • Construction: one blue circle, two white triangles, one small blue halo disk, a wooden bead head, and four pearl buttons.
  • Finish: an unstuffed folded dress with separately attached wings and head.

This is an original image-inspired adaptation. Stitch totals have been checked, but the pattern has not been physically crocheted or independently tested. Use the written rounds for exact stitch counts; the gallery guides show construction, folding, and assembly.

Materials

  • Sport or light DK cotton: about 15 g turquoise blue and 6 g white.
  • A 2.5–3 mm hook, or a hook that makes a neat fabric with enough structure to hold a fold.
  • One wooden bead approximately 20–25 mm across, with a vertical hole large enough for your sewing thread.
  • Four small sew-on pearl beads, approximately 5–6 mm.
  • Strong matching sewing thread, tapestry needle, scissors, pins, and a ruler.
  • A fine permanent craft pen or suitable craft paint for the face, unless the bead already has a face.

Choose the head and pearl sizes in proportion to your completed dress. A small round bead gives a delicate expression; a much larger bead may make the ornament lean forward. This is a decorative ornament with small parts and a hanging loop, not a toy.

Abbreviations and Notes

  • MR: magic ring.
  • ch: chain.
  • sc: single crochet.
  • dc: double crochet.
  • inc: 2 dc in the same stitch when used in the circle or wings.
  • sl st: slip stitch.
  • st / sts: stitch / stitches.
  • R: round. Totals appear in parentheses.

Join the circle rounds with a slip stitch and do not turn. The starting ch 2 does not count as a stitch. Work the first dc of each round into the same stitch as the join. Count only the actual dc stitches, not the turning chain or joining slip stitch.

The white wings are worked in turned rows. On those rows, the turning ch 2 also does not count. The head and pearls are beads; they are not crocheted components.

1. Crochet the Blue Circle

With turquoise yarn, start with a magic ring.

  1. R1: ch 2, work 12 dc in MR. Join to the first dc. (12)
  2. R2: ch 2, inc in every st. Join. (24)
  3. R3: ch 2, (dc, inc) × 12. Join. (36)
  4. R4: ch 2, (dc in next 2 sts, inc) × 12. Join. (48)
  5. R5: ch 2, (dc in next 3 sts, inc) × 12. Join. (60)
  6. R6: ch 2, (dc in next 4 sts, inc) × 12. Join. (72)
  7. R7: ch 1, sc in each st around. Join. (72)

Fasten off and weave in the ends. Pull the magic ring closed securely. Lay the circle flat and check its shape before folding.

The circle should measure approximately 12–15 cm across with the suggested materials, although individual tension varies. If it ripples strongly, check for extra stitches. If it cups, check the count and consider a slightly larger hook. Keep all increase rounds complete rather than adding random stitches to one area.

2. Shape the Folded Dress

Lay the circle with the right side facing down and choose one point on the outer edge as the top neck. Mark that point. Imagine a vertical line running from it through the center to the opposite lower edge.

Bring the left and right upper side sections inward toward that line. The right side of the crochet will show on the folded flaps. Let the flaps overlap slightly near the neck and upper front, then spread apart toward the lower half to create the curved opening shown in the reference.

Pin the folds and stand the shape gently on its lower curved edge to assess the bell-like dress. The top should be narrow enough for the bead head, while the bottom remains wide and flared. This is a folded circle, so there is no separate stuffed cone inside.

Sew the two flaps together at the neck and for approximately the upper third of the front opening. Keep the lower curved flap edges free. Adjust the overlap before finishing the seam so the dress sits symmetrically and the circular texture remains visible inside.

3. Crochet Two White Triangular Wings

Use white yarn. Make two identical triangles, then place them in mirror positions during assembly.

  • Row 1: ch 3, work 1 dc in the third chain from the hook. (1 dc; the unused chain height does not count)
  • Row 2: ch 2, turn, 2 dc in the only st. (2)
  • Row 3: ch 2, turn, inc in both sts. (4)
  • Row 4: ch 2, turn, inc, dc in next 2 sts, inc. (6)
  • Row 5: ch 2, turn, inc, dc in next 4 sts, inc. (8)
  • Row 6: ch 2, turn, inc, dc in next 6 sts, inc. (10)

Ch 1 and work a border: sc across all 10 top stitches, placing an extra sc at each top corner to turn neatly. Work 2 sc into each dc row-end space down one side and up the other. At the narrow starting tip, work (sc, ch 1, sc) to turn the point. Join and leave a long sewing tail.

The border is an edge finish and does not change the six-row triangle counts. Keep the stitches relaxed enough that the wing lies flat. Make the second wing in the same way.

4. Position and Sew the Wings

Place the dress front down. Position the narrow tip of each triangle near the back neck, with the wider outer section spreading to the left or right. Rotate the triangles until the outer corners sit above the middle of the dress, like the reference.

Overlap the inner wing tips slightly behind the neck and pin them in place. Turn the angel over to check that both wings show evenly from the front. Sew each wing securely along its inner edge and at the neck attachment point.

Leave the outer wing edges free. Stitching the entire wing flat to the dress would hide its triangular outline and reduce the open, spread-wing effect.

5. Prepare the Wooden Bead Head

If your bead is plain, add two small black eyes, a gentle curved smile, and pink cheek dots. Keep the hole running vertically from top to bottom and center the face on the front. Let all paint or ink dry fully before assembly.

Test the head against the dress neck. The bead should sit above the folds without sinking inside them. If the opening is too wide, add a few small gathering stitches across the back of the neck, keeping the front folds smooth.

6. Crochet the Small Blue Halo Disk

With turquoise yarn, ch 4 and join to the first chain to make a small ring. Ch 1 and work 12 sc into the ring. Join to the first sc, fasten off, and leave a sewing tail. (12 sc)

This little flat ring sits on top of the wooden head like a halo cap. Its center opening allows the head-attachment thread to pass through. Do not stuff it or turn it into a tall hat.

7. Make the Hanging Loop

With turquoise yarn, ch 30. Fasten off, leaving long tails. Fold the chain into a narrow loop and bring its ends together at the halo center.

Secure the two ends to opposite sides of the halo’s center opening. Keep the loop upright and check that the chain is not twisted. The final head-attachment thread will also pass through this area to reinforce the connection.

8. Attach Head, Halo and Loop

Use a doubled strong sewing thread. Anchor it through several stitches at the dress neck and the inner wing tips. Pass upward through the wooden bead hole, through the halo center, and around the base of the hanging loop.

Return down through the bead to the dress neck. Repeat the upward and downward pass at least once more, then secure the ends through several neck stitches. Tighten just enough to hold the head steady without crushing the dress folds.

Arrange the halo flat on the head with the loop centered above it. The thread should carry the ornament through the bead and into the dress; do not rely on the small halo edge alone as the hanger attachment.

9. Sew on Four Pearl Buttons

Arrange four small pearls in a vertical line down the upper front seam. Start just below the head and leave equal spaces between them. The lowest pearl should sit above the point where the curved flaps separate.

Sew each pearl individually through both front layers where they overlap. Make several passes through the bead hole and secure the thread on the inside. This decorates the front and helps keep the upper folds together.

For a bead-free version, embroider four small white circles or knots in the same positions. Keep the same front arrangement so the overall look remains close to the reference.

Finishing and Shaping

Hide all sewing ends inside the dress. Check that the head faces forward, the wings sit at matching heights, and the loop is centered. Give the hanger a gentle test over a soft surface before using it on a tree.

If the dress or wings need shaping, dampen only the crochet and let it dry in the desired position. Keep the painted wooden head and pearl finish dry where possible. Spot clean gently and store without crushing the wings.

Tabletop Construction Guide Notes

The two chart photographs below show one complete angel silhouette above the finished ornament resting on a table. They explain the folded dress and the placement of the separate wings, bead head, halo, loop, and pearls.

The dress itself begins as a flat circle: 12, 24, 36, 48, 60, and 72 dc, followed by 72 sc around the edge. Fold and sew it as described in the written instructions. Dashed guide lines indicate folding or sewing, not extra crochet stitches. The head and four pearls are non-crochet components.

More Handmade Christmas Ideas

Try the White Lace Angel, the Santa Gift Basket, or the Santa Claus Keychain for more handmade Christmas decorations and gifts.

Photo Tutorial, Tabletop Guides and Pinterest Images

The six images below include one folding and assembly tutorial, two tabletop construction guides, and three angel project images to save for later.

Leave a Comment