This Red Snowflake Bauble Crochet Pattern turns a simple round ornament into a cheerful Christmas decoration. A deep red circle, a gold cap and hanging loop, white embroidered snowflakes, rosy cheeks, and a little smile recreate the cozy details of the reference.
The ornament is made from two flat crochet circles joined around the edge. Keep it unstuffed for a flat decoration, or add only a whisper of filling for a gently padded finish.

Red Snowflake Bauble Crochet Pattern: Project Details
- Skill level: confident beginner, with simple embroidery and sewing.
- Terminology: US crochet terms.
- Estimated size: 10–12 cm across, depending on yarn and tension; the cap and loop add height.
- Construction: two red circles, two pink cheek circles, one ribbed gold cap, and one gold hanging loop.
- Finish: flat or very lightly padded, with the decorations worked on the front panel only.
This is an original image-inspired adaptation. The stitch totals have been checked mathematically, but the pattern has not been physically crocheted or independently tested. Use the written instructions for exact stitch counts; the gallery illustrations show the intended appearance and placement.
Materials
- Sport or light DK cotton yarn: approximately 20 g deep red, 3 g mustard gold, and scraps of pink.
- White cotton embroidery yarn for the snowflakes and dots.
- Black embroidery thread for the smile and stitched eyes, or two approximately 6 mm safety eyes.
- A 2.5 mm crochet hook, or a hook that produces a firm, tidy fabric.
- Tapestry needle, embroidery needle, scissors, stitch marker, and a few pins.
- Optional: a very small amount of stuffing.
Choose smooth yarn so the embroidery remains easy to see. A matte mustard cotton gives the cap a soft gold appearance without requiring metallic yarn. If you use a finer embroidery thread, double it for the large central snowflake.
For a decoration that children may handle, embroider the eyes and avoid detachable small parts. This project is a hanging decoration; its long loop is not intended as a toy feature.
Abbreviations and Notes
- MR: magic ring.
- ch: chain.
- sc: single crochet.
- inc: work 2 sc in the same stitch.
- sl st: slip stitch.
- BLO: back loop only.
- st / sts: stitch / stitches.
- R: round; row numbers are identified separately.
- (…) × 6: repeat the instructions inside the brackets six times.
Work the red circles in a continuous spiral. Place a marker in the first stitch and move it up each round. Do not join or turn between rounds. Each increase round adds six stitches. Turning chains on the cap do not count as stitches.
The embroidery, cheeks, and gold cap are separate finishing details. They are not extra stitches added to the red circle rounds. Complete the front decoration before closing the two panels so all yarn ends and eye washers remain hidden inside.
1. Crochet Two Red Circles
With deep red yarn, make two identical panels. The first will become the decorated front; the second is the plain back.
- R1: 6 sc in MR. Pull the center closed. (6)
- R2: inc in every st. (12)
- R3: (sc, inc) × 6. (18)
- R4: (sc in next 2 sts, inc) × 6. (24)
- R5: (sc in next 3 sts, inc) × 6. (30)
- R6: (sc in next 4 sts, inc) × 6. (36)
- R7: (sc in next 5 sts, inc) × 6. (42)
- R8: (sc in next 6 sts, inc) × 6. (48)
At the end of R8, sl st into the next stitch and fasten off. The finishing slip stitch does not count as a stitch. Leave a long tail on one panel for joining. Weave in the starting ends securely.
Lay both circles on a flat surface. They should have the same diameter. If the edges ripple, first check that you have 48 stitches; an accidental increase can distort the shape. If both panels cup despite correct counts, relax your tension slightly or try a slightly larger hook. Do not add unplanned increases to just one panel.
2. Plan the Front Decoration
Choose a top position for the gold cap and mark it with a contrasting thread. Keep this orientation throughout the embroidery. The eyes and smile occupy the lower third, leaving the upper half for the large snowflake.
Place the large snowflake center a little above the circle midpoint. Its longest rays should stay inside the outer edge. Reserve a narrow clear margin around the circle for the joining seam. Add the four smaller snowflakes around the upper left, upper right, middle left, and middle right areas.
Pin the cheeks and mark the eye positions before stitching anything permanently. Check the face from a short distance: the eyes should look level when the cap sits directly above them. The embroidery layout is decorative and does not need to follow individual round boundaries exactly.
3. Embroider the Large White Snowflake
Use white yarn and a blunt needle. Make eight straight rays from one shared center: up, down, left, right, and the four diagonals. Work opposite rays in pairs so the center remains balanced. Let the rays rest on the fabric without pulling the red circle inward.
Add one small V-shaped pair of branches near the outer end of every ray. Each branch is a short straight stitch that angles away from the main line. For a fuller effect, add a second pair slightly closer to the center on the four longest rays.
Split a long ray into two or three shorter straight stitches if a single loose strand would snag. Bring each new stitch up close to the end of the previous one to keep the line visually continuous. Hide the starting and finishing ends on the wrong side of the front panel.
4. Add Small Snowflakes and Dots
For each small snowflake, make four crossing straight stitches to create eight rays. Vary their length slightly so they resemble hand-embroidered snow rather than identical printed marks. Keep them clear of the cheek positions.
Add approximately eight to ten tiny white dots in the remaining red spaces. A small French knot or two short stitches worked over the same spot will create each dot. Space them irregularly, as in the reference, and leave the smile area uncluttered.
Check the wrong side before continuing. Loose embroidery loops can catch while you join the panels, so secure and trim every end now. The back panel will cover this work.
5. Crochet Two Pink Cheeks
With pink yarn, work 6 sc in MR. Join to the first sc with a sl st, pull the ring closed, and fasten off with a sewing tail. Each cheek has 6 sc; the joining slip stitch is not counted.
Flatten each tiny circle and sew it below and slightly outside an eye position. Catch only the front panel with your sewing stitches. Keep the stitches around the cheek edge small so the circle remains round rather than becoming a tight lump.
6. Finish the Smiling Face
Attach the eyes in the lower third of the front panel, approximately six to eight stitches apart. The exact spacing depends on the finished diameter and the eyes you choose. Keep the cheeks slightly below eye level. If using safety eyes, install the washers before joining the panels.
For embroidered eyes, fill two small round shapes with closely spaced black stitches and add one tiny white highlight to each. This gives a similar bright expression without plastic hardware.
Embroider a small U-shaped smile centered between the cheeks. Use three or four short backstitches to follow the curve instead of pulling one long strand tightly across the fabric. Secure the ends behind the front panel. Check that the circle still lies flat.
7. Make the Ribbed Gold Cap
With mustard gold yarn, ch 4.
- Row 1: starting in the second chain from the hook, sc in each chain. (3)
- Rows 2–8: ch 1, turn, sc BLO in all 3 sts. (3 per row)
Fasten off with a long tail. The eight short rows form a small rectangle. Rotate it so the ridges run vertically and the eight-row edge runs across the top of the bauble. This creates the ribbed cap shown in the reference.
Do not close the rectangle into a tube. It is a flat cap appliqué. Its lower portion will overlap the red circle, and its upper portion will extend above it. If the cap needs gentle flattening, dampen it lightly and shape it with your fingers.
8. Crochet the Gold Hanging Loop
With gold yarn, ch 24 and fasten off, leaving a long tail at both ends. Fold the chain in half to form a narrow loop. The two chain ends will be secured behind the cap, while the curved top remains free.
Place both ends together at the marked top of the back panel. Stitch them firmly through several red stitches, taking several small passes. Position the cap over this attachment area later so it hides the ends. Do not rely on the gold cap alone to carry the ornament’s weight.
9. Join the Two Red Panels
Place the circles together with wrong sides facing inward and align the marked top positions. Match all 48 stitches around the circumference. Use the long red tail to whipstitch the corresponding edge stitches together, keeping the seam even and relaxed.
For a flat finish, close the entire edge without stuffing. For a lightly padded ornament, stop with a small opening, spread a thin layer of filling inside, then complete the seam. The center should remain low and disk-shaped; avoid packing it into a ball.
As you close the top edge, stitch through the hanging loop attachment area again to reinforce it. Secure the red tail and hide it inside the panels. Smooth the seam with your fingers.
10. Sew on the Cap and Check the Finish
Center the gold rectangle at the top with its lower edge overlapping the red circle. Sew the lower and side edges securely, catching the red panels beneath. Keep the loop visible above the cap and cover its lower attachment ends.
Inspect the ornament from front and back. The cap should sit upright, the loop should be centered, and the face should appear level. Give the loop a gentle tug over a soft surface to check the stitches before hanging the decoration.
If a small area of the red edge curls, dampen that area and let the ornament dry flat. Avoid pressing plastic eyes with an iron. For cleaning, gently spot clean and allow the piece to dry completely before storing it.
Reading the Two Tabletop Charts
The two chart photographs at the end show the same bauble construction in different tabletop settings. The red circular field represents the eight single crochet rounds, while the gold top marks the separately sewn cap and chain loop. Decorative dashed markings indicate embroidery placement rather than additional crochet stitches.
Follow the written round list for the exact six increases in each round. Crochet the cheeks and cap separately, then sew them on as described above. The charts support the overall shape and placement; they do not turn embroidery or sewing into crochet stitches.
More Christmas Crochet Projects
Pair this smiling bauble with the Santa Star Ornament Crochet Pattern, the Green and White Christmas Tree, or the White Lace Angel for a handmade tree collection.
Photo Tutorial, Tabletop Charts and Pinterest Images
Save the visual tutorial, both chart photographs, and the three project images below for your next Christmas crochet session. All six images are grouped here after the complete written pattern.









