This Santa Star Ornament Crochet Pattern combines a forest-green star with a cheerful Santa face, a tall red hat, a light gray brim, and a scalloped white beard. Four little embroidered snowflakes decorate the visible green points, while a rustic hanging loop completes the top.
The face and nose have a little depth, while the star backing and hat stay flat. Layer the beard, curled moustache pieces, and hat over the center to recreate the cozy appearance of the reference.

Santa Star Ornament Crochet Pattern: Project Details
- Skill level: intermediate, including shaping, small pieces, embroidery, and layered assembly.
- Terms: US crochet terminology.
- Estimated size: approximately 13–16 cm tall, excluding the hanger; dimensions vary with yarn and tension.
- Construction: a five-point star backing, a shallow round face, a small nose, a tapered beard, two moustache pieces, a triangular hat, and a separate brim.
- Colors: forest green, red, light gray, white, peach, and a little pink.
This is an original image-inspired adaptation, not a transcription of another designer’s instructions. Stitch totals have been reviewed, but this pattern has not been physically crocheted or independently tested. The photographs illustrate the intended appearance; use the written instructions for exact construction.
Materials
- Smooth sport-weight cotton: about 15 g green, 10 g white, 6 g red, 4 g peach, and 3 g light gray.
- A 2.25–2.5 mm hook, or a size that makes neat, firm stitches.
- A pair of approximately 5 mm eyes, or black embroidery thread for stitched eyes.
- A small amount of stuffing for the nose and face.
- White embroidery yarn for the snowflakes and eyebrows; pink thread for cheeks.
- Tapestry needle, scissors, removable markers, and blocking pins.
- About 20 cm of natural twine for the hanging loop.
Keep the yarn weights similar across the separate pieces. Work the face and nose firmly enough to contain the small amount of stuffing. The eyes may be embroidered instead of using hard attachments; the ornament is intended as a decoration.
Abbreviations and Counting Notes
- MR: magic ring.
- ch: chain.
- sl st: slip stitch.
- sc: single crochet.
- hdc: half double crochet.
- dc: double crochet.
- inc: 2 sc in one stitch.
- dec: single crochet 2 stitches together.
- st / sts: stitch / stitches.
Work circular sc sections in continuous rounds and mark the first stitch. For flat rows, ch 1 and turn unless instructed otherwise; that turning chain does not count. The beginning chains of the brim do not count as hdc. Sewing and embroidery are separate finishing steps, not crochet stitches.
1. Make the Green Star Center
- Round 1: 10 sc in MR. [10]
- Round 2: Inc in each st. [20]
- Round 3: (Sc, inc) 10 times. [30]
- Round 4: (2 sc, inc) 10 times. [40]
Join with a sl st to the first sc of Round 4. Divide the 40 stitches into five consecutive groups of eight using markers. Each group becomes one point. Keep the five groups separate so no center stitch is used twice.
2. Shape Five Star Points
For the first point, continue from the current position. For each later point, join green at the first unused stitch of the next marked group. Work only across that group.
- Point Row 1: Ch 1, sc in the next 8 center stitches. Turn. [8]
- Point Row 2: Ch 1, dec, 4 sc, dec. Turn. [6]
- Point Row 3: Ch 1, dec, 2 sc, dec. Turn. [4]
- Point Row 4: Ch 1, dec twice. Turn. [2]
- Point Row 5: Ch 1, dec. [1]
Fasten off and repeat for all five groups. Weave the ends into the back. Dampen and block the backing into a balanced star, orienting one point straight upward. The red hat will cover most of that upper point; the other four points remain visible around the face and beard.
3. Crochet the Peach Face
- Round 1: 6 sc in MR. [6]
- Round 2: Inc in each st. [12]
- Round 3: (Sc, inc) 6 times. [18]
- Round 4: (2 sc, inc) 6 times. [24]
- Round 5: (3 sc, inc) 6 times. [30]
- Round 6: Sc in each st. [30]
Join with a sl st and fasten off with a long sewing tail. This is a shallow face cup, not a closed sphere. Position the eyes across the upper half, roughly between Rounds 4 and 5 with about five stitches between them. Fit any eye backs before sewing the face to the star, or embroider the eyes.
Add small white curved eyebrows above the eyes and pink embroidered cheek patches to the sides. Keep the cheek stitches short and their knots on the back. The nose will sit centrally below the eyes, and the beard will cover the lower part of the face.
4. Make the Round Nose
With peach, work 6 sc in MR for Round 1. Work 6 sc in Round 2. Add a tiny pinch of stuffing, then dec 3 times for Round 3. [6, 6, 3 stitches] Fasten off with a sewing tail and draw the remaining opening closed.
Sew the nose below the eyes using several small passes through the face fabric. Keep it round rather than pulling the sewing yarn so tight that it flattens. Save its final placement until the moustache pieces can be checked underneath it.
5. Crochet the Tapered White Beard
Ch 13. Starting in the second chain from the hook, sc in each chain for Row 1. Turn. [12 sc]
- Row 2: Ch 1, dec, 8 sc, dec. Turn. [10]
- Row 3: Ch 1, sc across. Turn. [10]
- Row 4: Ch 1, dec, 6 sc, dec. Turn. [8]
- Row 5: Ch 1, sc across. Turn. [8]
- Row 6: Ch 1, dec, 4 sc, dec. Turn. [6]
- Row 7: Ch 1, sc across. Turn. [6]
- Row 8: Ch 1, dec, 2 sc, dec. Turn. [4]
- Row 9: Ch 1, sc across. Turn. [4]
- Row 10: Ch 1, dec twice. Turn. [2]
- Row 11: Ch 1, dec. [1]
Fasten off with a sewing tail. The 12-stitch foundation is the beard’s upper edge; the final stitch is its bottom tip.
Scalloped border: Join fresh white at the upper-left corner. Travel down the left sloping side with one sl st into each row end. At the ends of Rows 2, 4, 6, 8, and 10, replace the plain sl st with (sl st, ch 2, 2 hdc, ch 2, sl st) into that row end. Work one identical scallop into the bottom tip. Travel up the right side, making matching scallops at Rows 10, 8, 6, 4, and 2 and plain sl sts at intervening row ends. Fasten off at the upper-right corner. [11 scallops: five per side and one at the tip]
Leave the top edge straight for sewing. Ease the little scallops outward with your fingers and block the beard gently so it stays flat with a rounded, tapered outline.
6. Make Two White Moustache Pieces
Ch 6. Work around both sides of the chain. Starting in the second chain from the hook, work sc, hdc, dc in each of the next 2 chains, then 3 hdc in the last chain. Rotate the chain and work along its underside: dc in each of the next 2 chains, hdc in the next chain, then 2 sc into the starting chain. Join with a sl st to the first sc. [12 stitches]
Fasten off with a sewing tail. Make a second piece. Place the two ovals horizontally beneath the nose, with their outer ends angled slightly upward. Use the sewing stitches to curve the ends gently, creating the curled moustache appearance.
7. Crochet the Red Hat
Ch 2. Sc in the second chain from the hook for Row 1. Turn. [1 sc]
- Row 2: Ch 1, inc. Turn. [2]
- Row 3: Ch 1, inc in both sts. Turn. [4]
- Row 4: Ch 1, sc across. Turn. [4]
- Row 5: Ch 1, inc, 2 sc, inc. Turn. [6]
- Row 6: Ch 1, sc across. Turn. [6]
- Row 7: Ch 1, inc, 4 sc, inc. Turn. [8]
- Row 8: Ch 1, sc across. Turn. [8]
- Row 9: Ch 1, inc, 6 sc, inc. Turn. [10]
- Row 10: Ch 1, sc across. Turn. [10]
- Row 11: Ch 1, inc, 8 sc, inc. Turn. [12]
- Row 12: Ch 1, sc across. Turn. [12]
- Row 13: Ch 1, inc, 10 sc, inc. Turn. [14]
- Row 14: Ch 1, sc across. Turn. [14]
- Row 15: Ch 1, inc, 12 sc, inc. Turn. [16]
- Row 16: Ch 1, sc across. [16]
Fasten off with a sewing tail. Lay the triangle with its narrow starting tip upward. Do not add a pom-pom; the reference has a plain pointed red hat.
8. Make the Light Gray Brim
Ch 18. Starting in the second chain from the hook, hdc in each chain. Turn. [17 hdc] Ch 1 and hdc across for Row 2. [17 hdc] Fasten off with a sewing tail.
Curve the strip gently across the hat’s broad lower edge. Its small overhang softens the join around the face. Sew it over the red base, keeping the two ends even.
9. Layer and Sew the Ornament
- Lay the blocked green star with one point upward. Center the face over the middle, slightly above the star’s center line.
- Sew around most of the face edge, add a thin layer of stuffing behind it, and close the remaining opening.
- Place the beard over the lower face, tapering toward the space between the two bottom star points. Sew the straight upper edge and a few hidden points along its sides.
- Arrange the moustache pieces beneath the nose, overlapping the upper beard. Sew them in place, then finish securing the nose over their inner ends.
- Place the red hat over the upper green point with its gray brim just above the eyes. Sew the hat to the backing and tack the brim ends neatly beside the face.
- Check that the four side and lower green points remain visible and that the beard sits centrally.
10. Embroider Snowflakes and Attach the Hanger
Embroider one small white asterisk on each of the four visible green points. Make three crossing straight stitches through the same center to form six rays. Keep the stitches on the green fabric, clear of the star edges.
Fold the twine into a loop and sew both ends firmly to the back of the hat tip, catching the green star point as well as the red fabric. Tie the ends securely at the back. The hanger should support the backing and hat together. Weave in all yarn ends and check the ornament upright.
Using the Tabletop Stitch and Assembly Guides
The two guides show the complete Santa-star arrangement on paper above the finished ornament lying on a craft table. The star, face, hat, beard, nose, and moustache are separately shaped pieces. Dashed marks indicate sewing. Use the written row and round lists for increases, decreases, and the small stuffed parts.
The green backing has five points, although the upper point is mostly covered by the hat. Four embroidered snowflakes belong on the four visible points. The brim is light gray, and the red hat has no pom-pom.
Helpful Finishing Tips
- Uneven star: check five groups of eight center stitches and the point counts 8, 6, 4, 2, 1.
- Face looks too puffy: use only a thin layer of stuffing behind the shallow cup.
- Moustache hides the eyes: lower the inner ends beneath the nose before sewing.
- Beard curls: loosen the border stitches and block gently before attaching.
- Hat tilts: align its tip with the upper star point and center its brim above the eyes.
More Free Christmas Crochet Patterns
- Green and White Christmas Tree
- White Lace Angel Ornament
- Christmas Bell Ornament
Save Your Santa Star Ornament Crochet Pattern
Make a cheerful Santa star for your Christmas tree or a special handmade gift. Happy crocheting from !
Photo Tutorial, Two Tabletop Charts, and Pinterest Images
Find the assembly tutorial, two stitch-and-assembly tabletop guides, and three Pinterest images below.









